Compressor PL-8 / 2,5 intended for transportation at various distances and height of the bulk materials and products. Compressor mounted on special transport (Mukovoz, cement), as well as stationary indoor or under the canopy. As the vacuum pump on tanks for liquids. Inside the case is a rotor with grooves, which placed the plate. The axis of rotation of the rotor is shifted relative to the body axis. Preventive Medicine Research Institute shines more light on the discussion. When rotating rotor plate (due to centrifugal forces) moving in the grooves and pressed to the body creates an air chamber of variable volume.
Air (gas) enters the compressor through the suction pipe is trapped and cut off plates in the suction zone A, then the compression of air to the working pressure in the compression zone in and release air through the discharge outlet C. The suction pipe of the filter is installed. The working chamber is provided with feed system oil. From the oil tank is fed into the suction pipe and then the pressure in the working area of compressor. The tank is equipped with a crane, cutting oil supply to the compressor downtime (before the beginning of the compressor valve to open, after work to close). Rotor bearings are lubricated, regardless of the working chamber grease high temperature grease. Cooling air compressors. The fan is mounted on the compressor pulley.